No unlabeled substances in the laboratory at any time!
Labeling Basics
- Use labels with good adhesive.
- Use a permanent marker (waterproof and fade resistant) or laser (not inkjet) printer. Print clearly and visibly.
- Replace damaged, faded or semi-attached labels.
Additional Reading: Lab Safety: Teacher Responsibilities
Commercially Packaged Chemicals
- Verify that the label contains the following information:
- Chemical name (as it appears on the SDS)
- Name of chemical manufacturer
- Necessary handling and hazard information
Make sure you add:
- Date received
- Date first opened
Secondary Containers and Prepared Solutions
- Label all containers used for storage with the following:
- Chemical name (as it appears on the SDS)
- Name of the chemical manufacturer or person who prepared the solution
- Necessary handling and hazard information
- Concentration or purity
- Date prepared
Containers in Immediate Use
- Chemical name (as it appears on the SDS)
- Necessary handling and hazard information
Peroxide-Forming Substance
Peroxide-forming chemical must be labeled with:
- Date received
- Date first opened
- Date to be disposed of
NOTE: Some States also require (1) National Fire Protection Association (NFPA) code (refer to APPENDIX B) and/or (2) CAS number to be listed on the label. Consult the State regulations. This information is from the School Chemistry Laboratory Safety Guide created by the U.S. Consumer Safety Product Commission (CPSC), Department of Health and Human Services, Centers for Disease Control and Prevention (CDC), and the National Institute for Occupational Safety and Health (NIOSH).
Chemical Waste
All containers used for chemical waste should be labeled with:
- “WASTE” or “HAZARDOUS WASTE”
- Chemical name (as it appears on the SDS)
- Accumulation start date
- Hazard(s) associated with the chemical waste
Lab Safety Equipment from Carolina
Carolina offers an extensive line of chemicals, chemistry sets, lab safety products and equipment.
